Come and mod your NERF RIVAL FATE XXII-100!

Posted by WorkerJGC on

① Disassemble the main body shell

② Dig a hole with a size of 28MM*71MM at the position shown in the figure. Note that this step needs to destroy the shell of the blaster.

Note: The process is irreversible.

③ Remove the two parts shown

④ Install push rod(Can be fixed with Teflon tape)

⑤ Install the Magazine Adaptor

⑥ Install the shell and screws (pay attention to distinguish long and short screws)

Share this post

Newer Post →